What PC requirements are needed to run the camera systems?
USB equipped PC, Pentium II or higher, 512 RAM, Windows 98/2000/Me/XP/Vista, Sound card (optional for audio capture) and recommend MIN 20GB Hard Drive.
How are the cameras powered?
Cameras are powered by a 12V D/C adapter each or you could use a Multi Power Supply for 4 all 4 cameras. Batteries can be used, however batteries will lose power quickly and would usually need to be replaced on average every 6-8 hours.
Do the camera sytems need to be professionally installed?
No. All of our bar camera systems can be installed right out of the box by you. If you can setup a VCR, then you can setup our camera sytems. The only physical part of setting up the camera system is mounting the cameras. This is easily done with a screw driver.
Do I need anything else to operate your camera systems?
Other than already having a computer system, no. Our camera sytem packages come with everything you need to get up and running fast. These are complete systems and include all hardware. Just install the software on your computer, setup up the cameras and you are ready to go.
What is the difference between a wired and a wireless camera?
Wired cameras have a video cable that runs from the camera to your recording or viewing device such as a DVR, VCR or monitor. Wireless cameras have a built-in transmitter that sends the video signal to a receiver. The receiver connects to your recording or viewing device.
How far can a wireless camera transmit?
Wireless cameras can transmit up to 1000 feet from the receiver.
How many wireless cameras can you have in one location?
You can have up to four wireless cameras in one location. You can view all cameras at once using four receivers or you can use one receiver and switch to each camera. You will only be able to view one camera at a time if you only use one receiver.
Will a cordless phone interfere with wireless cameras?
A Cordless phone that operate on the 2.4 GHz frequency might cause interference with our 2.4 GHz cameras. Interference should be minimal and usually occurs if the phone is between the camera and receiver.
What is a 2.4 GHz wireless frequency?>
A frequency is used to transmit a signal or data like video. 2.4GHz is the specific wireless frequency that our tranmitters use to send video signal to a receiver. All of our wireless cameras operate on the 2.4 GHz frequency. These units are FCC approved.
Are the transmitters FCC approved?
The transmitters used in all of our wireless systems are FCC and Industry Canada Certified.
What is a Quad?
A Quad splits your monitor into 4 sections allowing you to view 4 cameras at once.
Will a Quad allow four cameras to record at the same time?
Yes you can record all four cameras at the same time. You also can record using a switching monitor, which will record the camera that is showing at that moment.
Do the receivers work through walls up to two feet thick?
Yes as long as there isn't excessive amount of metal in the wall.
Do I need a VCR to record what the cameras see?
No, you do not need a VCR with any of our camera systems. Our software installed on your computer record everything.
Between what temperatures is it safe for cameras to operate in?
It is safe for color cameras to oeperate between -23º C to +40ºC or -10ºF to +104ºF
I have some more questions to ask, who do I talk to?
We are always here to help, so click here and ask away.
|
Bar Cop inventory control and surveillance products... protecting thousands of bars daily! Bar Cop is the leading liquor inventory control software developer for bars, hotels, restaurants and nightclubs; selling the most affordable and complete beverage inventory software available in three different options: Bar Cop's Pro Software, Elite Package and Bar Audit Business Package.